Replace OEM: #5116079AA, 5160308AA, 4805742AB, 5113049AA, 5116079AA, 5303833AA, 68024312AB This nozzle sprayer is designed to clean the dirt off the windshield. The nozzle sprays water extensively on the windshield. It keeps the windshield translucent and provides a clear view.
The windshield washer hose kit is made of high quality rubber, soft and flexible, strong and durable for long term use. The front windshield nozzle is made of high quality plastic, light weight and corrosion resistant, which can effectively extend the service life of the wiper blade.
Package includes：
1×5m hose + 12pcs connectors (4×T type, 4×Y type, 4×I type) + 2 nozzles + 2 rubber pads
Henry –
Had a hose crack and lose pressure, was able to replace it with this and works great right now.
Monique –
I ordered this because my hoses cracked and broke preventing me from using my windshield wiper fluid. Instead of getting more plastic piping I got this rubber hose instead since I live in an extremely hot climate, my hubs replaced the line for me and everything worked just fine.For reference I have a 2018 jeep compass sport and it fit my car no issue.
M. Tarantini –
I’m sure these are decent nozzles, but they are too large to fit my 2004 Mitsubishi Eclipse. The holes on the hood are too small for these nozzles to fit. Check the hood hole size before ordering. I’ve ordered nozzles with the screw on nut (vs these that press in) to try those next since they should have a smaller footprint.
Armando Mejia –
I bought this to repair a broken/punctured windshield washer hose. I didn’t need to replace the whole line, just repair one leaking line due to a hole/puncture. Simply cut the hose, linked the ends with the included hose connectors, and I was back in business! Rubber hose and parts all feel durable and if quality. I don’t predict any issues, but plenty let over parts for future repairs.
TR. –
Sprayers are pretty bad, but it has a good hose set.It had 3 sprayers, a good little bit of hose, and some connectors. The tool works well for popping out the “christmas tree” push pins that hold heat liner in place, and there are more then enough to replace all of them afterward. This little kit is about good enough for 2 jobs depending on how much of everything you may need. The hose is a very squishy material though, so it can be a little tough to connect, but holds well in place. If you are having sprayer issues, this little kit has what you need to get it done nicely. (As long as a hose/sprayer issue!)Edit: I really noticed the sprayers after the fact. It took some troubleshooting, but finally realized the sprayers have too big an opening to “spray” well. I had to block one up a bit to achieve somewhat of a decent spray.
PPA –
Fixed my problem with ease.
Randy Arnold –
Had some broken lines in my windshield washer fluid. This worked great. Patched the areas that were rotted, and now it works great. Very happy.
Anne Dwyer –
I recommend using rip ties or something to hold the tubes down tight. I just had them slipped over one another thinking they would just stay because that’s what all the videos said, but with the pressure of the washer fluid it would just pop right off and shoot right into my engine bay. I got a zip tie and tightened it on the two tubes and it’s held ever since. The plastic pieces are pretty brittle so if you have to go back after awhile and try and redo or undo anything they will most likely snap and break.
Tryzub –
Hose is excellent and connectors fit Buick.
My plastic hose broke so I had to replace it. Yes, I broke it when I replaced the belt tensioner… The hose in this kit expands and hugs connectors as if it were made of silicon. A very pleasant surprise. I had to use one double side connector to connect to the downside hose coupler. I then slid the hose over the hard tube stump that remained at the top, then put a plastic tie wrap to hold it in. Works like a charm. It is unfortunate I had to pay this much for 10 inches of hose and a connector, but these can’t be purchased separately without the nozzles. The OEM kits in the stores cost $35, so this is 1/3 of the price and this makes me ‘relatively’ happy. I have a 2003 Buick Lesabre which just keeps running and running and running. What a great car!
Miguel Angel Cabrera Vazquez –
Perfeto reemplazo
Lo use para reemplazar las mangueras del liquido limpiaparabrisas de mi ACCORD 2001 y quedo muy bien. el largo de la manguera es suficiente para poder reemplazar las mangueras del auto y todavía me sobró. LA calidad de la manguera se ve buena, el diámetro fue adecuado y ajustó perfectamente, además trae conectores de varios tipos que te pueden servir para reemplazar los de las conexiones si es necesario.